ACTAtek ACTAtek3 Series Manual page 23

ACTAtek Pte Limited
Managing the network settings, including IP assignment, Subnet Mask, DNS, and so on.

Resetting the system and other miscellaneous terminal settings can also be done.

Each of these steps will be discussed in detail in the following sections, starting from Adding
a new user to Exiting from the system.
Changing the Default ID & Password:
The first thing to do with the unit is to change the Administrator ID & password, to do so:
1. Log in to the web interface using a web browser. (Make sure the ACTAtek3
connected to the network)
2. Default ID: A999, Default Password: 1, Super Administrator, and click OK
3. Go to "View User List", click on the ID "A999".
4. Enter the new Administrator ID, and Password, and click "Modify". (The name and other
details can also be changed here either now or later)
ACTAtek3 Manual
TM
is
23