Preoperational Ladder Inspection Checklist - Little Giant HYPERLITE Series Operating And Safety Instructions Manual

HERE AT LITTLE GIANT, OUR MISSION IS
YOUR SAFETY IS OUR TOP PRIORITY!
FOR YOUR SAFETY, GO THROUGH THE FOLLOWING INSPECTION
CHECKLIST BEFORE EACH USE.
NEVER CLIMB A DAMAGED, BENT, OR BROKEN LADDER!

PREOPERATIONAL LADDER INSPECTION CHECKLIST

YES NO
Are any of the rungs loose, bent, cracked or missing?
Are any of the side rails cracked, bent, split or frayed?
Are any of the feet worn, broken, missing or not functioning
correctly?
Are any of the rung locks bent, broken, missing or not
functioning correctly?
Are any of the rivets, screws or bolts loose, broken or
missing?
Is the rope frayed, worn, broken or missing?
Are any of the pulleys loose, broken, or missing?
Are any of the safety labels unreadable or missing?
Is there any rust or corrosion on the ladder?
Are there any missing or damaged components not
mentioned above?
Is there any mud, oil, ice, wet paint or other slippery
substance on the ladder that could lead to a fall?
IF YOU ANSWERED YES TO ANY OF THESE POINTS, REMOVE THE
LADDER FROM SERVICE UNTIL THE NECESSARY REPAIRS HAVE BEEN
MADE. PLEASE CONTACT OUR CUSTOMER EXPERIENCE TEAM AT
800-453-1192 FOR REPLACEMENT PART AND WARRANTY INFORMATION.
13