Alfa Romeo STELVIO 949 Owner's Handbook Manual page 118

114
With the device enabled and ready for
operation, the display shows the white
icon with dashes fig. 115 in place of the
speed.
115
Setting a speed activates the system.
The displays shows the green icon with
the set speed.
IMPORTANT It is dangerous to leave the
device activated when it is not used.
116
There is a risk of inadvertently activating
it and losing control of the vehicle due to
unexpected excessive speed.
Pausing / Deactivating
With the device enabled (speed not set),
press the button.
With the device activated (speed set),
press the button to enter the Paused
state. The display shows the white icon
with the speed in brackets. Press the
07146V0010EM
button again to deactivate the device
completely.
SETTING THE DESIRED SPEED
The speed can be programmed from a
minimum of 20 mph (30 km/h) to a
maximum of 110 mph (180 km/h).
When the vehicle reaches the desired
speed, raise/lower the SET switch
fig. 116 and release it to activate the
device. When the accelerator is released,
the vehicle will keep the selected speed
automatically
07146S0016EM
Alfawiki.nl
116
While the accelerator pedal is pressed:
the device will not be able to control
the distance between the vehicle and the
one ahead. In this case the speed will be
determined only by the position of the
accelerator pedal.
The device will return to normal
operation as soon as the accelerator
pedal is released.
The system cannot be set:
when pressing the brake pedal;
when the brakes are overheated;
when the electric parking brake is
engaged;
when it is in P (park), R (reverse) or N
(neutral) mode;
when the engine speed is above a
maximum threshold;
when the vehicle speed is not within
the settable speed range;
when the ESC (or ABS or other
stability control systems) are operating
07146V0017EM