Table of Contents
Advertisement
4.5.2
Stream
To set the image resolution when event occurs across channels or general recording is in process.
Stream > Main Stream
To set the image quality and resolution of Main Stream
No.
1
2
3
4
5
6
7
Copy Stream
User Manual
Figure 4-27 RECORD > Stream > Main Stream
Table 4-29 RECORD > Stream > Main Stream Item and Description
Name
CH
Display channels.
Resolution
Show camera main stream setup status.
Framerate
Bitrate
Continuous
Select recording stream in case of Continuous mode.
Event
Select recording stream in case of Event mode.
Pre-Alarm
Start recording before set time, if event occurs (null, 1 sec, 2 sec, 3 sec, 4
sec, and 5 sec).
Post-Alarm
Recording after set time until event ends (null, 5 sec, 10 sec, 30 sec, 1 min,
5 min, and 10 min).
Copy main recording image set value to other channels.
Setup
Function
Page 49
Advertisement
Table of Contents
