Advertisement
Set the desired wordlength on the 328 with the rotary encoder.
Press the down cursor to set the port for 328 ADAT port B, as for port A, and again to set the
wordlength for port B. Press <ENTER> to confirm the settings.
<Tape Ch25->32 >
Bank Source:ADAT
S/PDIF Input
S/PDIF Input
S/PDIF Input
S/PDIF Input
The 328 S/PDIF input can be routed to any one of the following inputs:
Stereo Input 1, Stereo Input 2, FX Return 1, FX Return 2, 2 Track Tape Return,
providing that the AES/EBU input or oscillator has not already been assigned to that input.
Commonly the Dakota S/PDIF output would be routed to Stereo Input 2, or the 2 Track Tape
Return input.
Assigning a digital source to an input will override any analogue signal
NOTE
present on that input.
Press <MENU> to enter the menu pages, scroll through the pages until the 'SPDIF I/P Setup' is
highlighted and press <ENTER>. Using the rotary encoder, select the destination for the
S/PDIF input, and press <ENTER> to confirm the setting:
< SPDIF
Route To: STE-1
< SPDIF
Route To:
If the S/PDIF input is not required, NOWHERE should be selected in the
NOTE
menu.
<Tape Ch17->24 >
Wordlength:
Input >
Input >
2TRK
Dakota Setup Guide
24
<Tape Ch25->32 >
Wordlength:
< SPDIF
Input >
Route To:
< SPDIF
Input >
Route To:NOWHERE
24
FX-1
5
Advertisement
