Download Print this page

SoundCraft DAKOTA 328 Setup Manual page 13

Soundcraft computer hardware user manual

Advertisement

ASIO Resolution
ASIO Resolution
ASIO Resolution
ASIO Resolution
If you wish to use the Dakota as an ASIO device (e.g. with Cubase VST), the playback/record
wordlength should also be set. The Dakota supports both 16 bit and 24 bit ASIO wordlength
resolution. Set the desired wordlength resolution in the 'System' page of the Dakota Control
Panel under the 'ASIO Resolution' section:
NOTE
12
If you are using the Dakota as an ASIO device it is important that the
wordlength set here is the same as the 328 S/PDIF output wordlength
and also the same as the 328 Tape Port wordlength. The PC software
supporting the ASIO devices (e.g. Cubase VST) must also be set to work
at this resolution – see the software manual for more information. This
maintains an optimum bit resolution throughout the entire system. See
Section 2 - 'Digital 328 Setup' for information on making these settings
on the 328.
Spirit Digital 328 v2

Advertisement

loading