General Information And Safety Instructions - Ambiano FPD1000 Instruction Manual

3.5L DIE CAST FOOD PROCESSOR
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
The product is guaranteed to be free from defects in workmanship and parts for a period
of 36 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion. The bene ts
conferred by this warranty are in addition to all rights and remedies in respect of the product
that the consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
AUS 1300 663 907
.
3
customercare@winplus.com.au
YEAR WARRANTY
MODEL: FPD1000 PRODUCT CODE: 9748 07/2019
General Information and
Safety Instructions
GENERAL INFORMATION & SAFETY INSTRUCTIONS
• Do not use in dusty conditions.
• Do not drop the Food Processor. Dropping or rough use of the unit will cause damage.
• Do not place near strong magnets or strong electric currents.
• When the Food Processor is not in use, turn OFF and unplug from any power source.
• There are no user serviceable parts in the Food Processor - Do not attempt to repair,
open or alter any components. In the case of improper usage or if you have opened,
altered or repaired the product yourself, all guarantees are void.
• The supplier does not accept responsibility for additional or consequential damage
other than covered by legal product responsibility.
• The supplier is not responsible for the end use of this product including any improper
use or when used for purposes that are not specified.
Below is a table that shows the recommended operation time using each attachement.
Process Attachment
Chopping Steel Processing Blades
Shredding Processing Discs
Dough Kneading Plastic Processing Blades
Egg whites Whip and Whisk Tool
Cream Whip and Whisk Tool
Product Complies with AS/NZS 60335.1 and AS/NZS 60335.2.14
Version No: 1.0
Issue Date: 5 FEB 19
AFTER SALES SUPPORT
4
1300 663 907 .
AUS
Recommended Operation Time
2 Minutes ON followed by 2
minutes rest
60 seconds ON followed by 2
minutes rest
15 seconds ON followed by 2
minutes rest
30-70 seconds on followed by 2
minutes off
20-30 seconds on followed by 2
minutes off
customercare@winplus.com.au
MODEL: FPD1000 PRODUCT CODE: 9748 07/2019