IKEA IDASEN Manual page 5

Installation instructions
— The table is assembled according to
separate assembly instructions.
— Connect the cable from one leg to the
other. Connect the hand control and
the power supply to the leg. The cables
to legs, hand control and power supply
should be placed in the tray created by
the frame. Place the electrical cables
so that they do not get damaged, see
assembly instruction.
— Connect the electrical cable to a wall
socket.
NOTE! The electrical cable must have
full mobility.
— The table is now ready for use. The
motors stop automatically when the
table reaches its lowest and highest
position respectively.
Usage of the table
— The table shall only be used as a
working table with the possibility to
continuously adjust working height
between sitting and standing position.
The table shall only be used indoors and
in dry premises (office environment or
similar).
The table must not be overloaded -
maximum load is 75 kg/165 lbs. The
system may be run continuously for
maximum 2 minutes. Afterward, the
motors must stand by for approx. 18
minutes before they can be used again.
QUICK GUIDE
If you have an IOS device:
Go to the App Store and download the Desk
Control app. The app will take you through
the process of installing your Desk control.
If you have an Android device:
Go to Google Play and download the Desk
Control app. The app will take you through
the process of installing your Desk control.
Add additional Bluetooth device(s)
(max 8 devices)
1. Go to your Bluetooth menu on your
mobile device and connect to DESK-
xxxxx.
2. Once Bluetooth connection is
established, the blue LED stops blinking.
Up to 8 devices can be stored by the
system. When the 9th device is paired the
system will remove the device that have
not been connected for longest time
Factory reset:
Press manoeuvre button for 10 sec. This
deletes all paired Bluetooth devices.
5