Safety Instructions; Servicing - Ideon Audio 3R Master Time User Manual

In the front panel of the device as shown in the illustration below there
are 3 indicator lights:
* the power light shows that the device is on
* the lock light shows that the 3R Master Time has successfully
connected to the DAC
* the host light shows that the the 3R Master Time has successfully
connected to the computer

SAFETY INSTRUCTIONS

 WARNING. TO REDUCE THE RISK OF FIRE OR ELECTRICAL
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
 Clean only with a dry cloth. Do not place flammable material on
top of or beneath the component.
 Do not remove or bypass the ground pin on the end of the AC cord unless
necessary to reduce hum from ground loops of connected equipment. This
may cause RFI (radio frequency interference) to be induced into your
playback setup. Removing or bypassing the ground pin on any electrical
component is potentially dangerous and should be avoided for safety
reasons.
 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus. Unplug this apparatus during lightning storms or when unused
for long periods of time.

SERVICING

THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY PS AUDIO PRODUCT.
REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL Please contact your
authorized dealer, distributor, or Ideon
Audio if you have any questions not
addressed in this reference document.
www.ideonaudio.com
3
3R Master Time manual