Advertisement
How to Use
1. Tone/Pulse switch
On the bottom of telephone base is the P/T switchable dialer. If you have touch tone service then slide
the switch to the T (Tone) position; if you have rotary dial service then slide the switch to the P (Pulse)
position.
2. Making and Answering Calls
To get a dial tone or answer an incoming call, lift the handset. To hang up, either replace the handset
or simply press the HANDSET CRADLE.
Making calls via landline telephone
Pick up the handset, when you can hear sound which means the telephone works well, you can dial
out correspondent numbers you want via number button on keypad to talk with someone you want.
Receiving landline calls
When the landline number called, you can hear the telephone ring sound, pick up the handset to
receive the incoming calls directly.
Receiving mobile phone calls via Bluetooth
Once the smart phone search for telephone Bluetooth speaker, It will be displayed as PYLE SPEAKER,
once pairing successfully, When mobile phone called, you can hear the smart phone ring sound from
speaker, press " " button to receive incoming calls via speaker or pick up the handset to receive the
calls, at this time the LED light on keypad is in blue color. Press" " button again to finish calls.
3. Ringer H/L switch
You can choose the loudness of the ringing of the phone by the ringer switch located on the bottom
of telephone base to either H (High) or L (Low) position
4. Last Number Redial (REDIAL)
The feature may be used to speed dial the last number dialed. Simply pick up the handset listen for
dial tone and then momentarily press the REDIAL button, the last number dialed will dial out automat-
ically.
5. Flash Function (FLASH)
If you get a busy tone after entering the number, press the FLASH button first, after hearing the dial
tone, institute a dial tone for another call.
Press the FLASH button to terminate a call, and institute a dial tone for another call to getting another
call from call waiting.
6. Charge for smart phone/iPod
This unit has a USB charging port. With a standard USB charging cable, connect the USB output termi-
nal port (CHARGING, see picture above) to charge the phone and iPod. (Output voltage DC 5V-2A)
4
Advertisement
