Advertisement
Installation
1. Connect the telephone handset cord to the handset jack 1
2. Connect the telephone line cord to the line jack 2
3. Connect the other telephone line cord to the telephone wall socket
4. Adjust the desired level (L/H) of the ringer signal with the switch on the under side of the telephone
(see pictures below)
NOTE: When picking up the handset, if you can hear sound it means your connections are correct.
Back panel function
Before operation please makes sure the adapter (110W-220W) is connecting and power button is on
status, please check the LED indicator on keypad, it is in red color and which means it works well. OFF
means power shut off. See pictures below.
2
Advertisement
