Related Manuals for Arcora International ArTech PRO1.1
Summary of Contents for Arcora International ArTech PRO1.1
- Page 2 Dear Customers Thank you for choosing ARCORA. We sure you want to know your new vacuum cleaner as quickly as possible and operate it safely. Please read this user manual before using the device. To avoid accidents and damage, start with the chapter >>...
-
Page 3: Technical Details
Section 1 Technical Details The PRO1.1 vacuum cleaner can be used as a dry vacuum cleaner for cleaning large areas in offices, hotels, restaurants, doctors' practices, shops. The vacuum cleaner can be used to clean hard floors (stone, parquet, plastic) as well as soft floors (carpets, upholstered furniture, curtains). - Page 4 Section 1 Technical Details brush nozzle suction hose metal plug tube crevice nozzle vacuum cleaner upholstery nozzle nozzle paper filter bags...
-
Page 5: Operating Elements
Section 2 Operating elements The flexible suction hose with rotating end pieces facilitates the Upholstery nozzle operation of the accessories. The bleed valve is on the handle of With the upholstery nozzle the suction hose. you can dust off upholstered With the slider of the valve you can adjust the suction power, furniture, mattresses, pillows, especially recommended for curtain cleaning. - Page 6 Section 2 Operating elements Nozzle The floor nozzle is the most commonly used element of the accessory. It is suitable for large flat surfaces such as carpets or floors. For vacuuming smooth floors such as PVC, parquet or stone, floor nozzle additionally equipped with a brush.
- Page 7 Section 3 Handling lid holder handle switch locking lever connection case opening for the suction hose power cable...
- Page 8 Section 3 Handling Before switch on the vacuum cleaner: Replacing the dust bag Turn off the vacuum cleaner and pull out the plug. Please make sure that the paper bag is correctly inserted in the housing inlet. Do not use the vacuum Remove the suction hose from the device.
- Page 9 Section 3 Handling Replacing the foam and motor protection filter. From time to time, the foam and motor protection filters release lid clips must be changed. In the event of visible contamination, you can clean them by rinsing in lukewarm water with a little detergent and after complete drying, replace the cover.
- Page 10 Section 3 Handling Remove the engine protection filter from the grid of the motor protection filter bonnet. Please place new or cleaned motor protection filter on the grid of the bonnet. Place the lid insert on the vacuum cleaner housing – with the grid on the motor protection filter.
- Page 11 Section 4 Saftey Instructions The vacuum cleaner may only be used with the Saftey Instructions paper filter dust bags and filters approved for this machine. Only then is the perfect suction Please note that improper handling of electrical guaranteed. Used or damaged dust bags must not appliances may present hazards that may not be be reused.