Related Manuals for tanning essentials PROV
Summary of Contents for tanning essentials PROV
- Page 1 SIMPLE TANNING SYSTEMS built purposely for a perfect spray tan. - TRAINING MANUAL www.tanningessentials.co...
- Page 2 WELCOME Thank you for choosing the Tanning Essentials Pro Spray Tan System. Please read the following to help assist you with the set up and maintenance of your spray tan unit. You can also view the full video on Pro V Spray Tan System Set Up, Maintenance and Troubleshooting via You Tube.
-
Page 3: Spray System
SPRAY SYSTEM ON/OFF Switch Carry Handle Cup Holders Control Panel Power Plug Hose Connector Socket Shock Absorbing Washable Filter Feet (Underneath Unit) SPRAY APPLICATOR Adjustable Solution Dial Spray (On Side) Nozzle Spray Trigger Handle Solution Cup Hose Connector (Underneath) www.tanningessentials.co... - Page 4 SPRAY APPLICATOR STEP 1 Unscrew the solution cup and fill ¾ full. Overfilling the solution cup may cause leaks. STEP 2 Insert solution cup and screw tightly. STEP 3 Set nozzle by turning, vertical position for up and down and horizontal position for left and right spraying.
- Page 5 SPRAY UNIT STEP 1 Attach hose to unit. Insert hose fitting into unit and turn clockwise until firm. This connection is similar to a light bulb connection and avoid over tightening as this may result in broken components. STEP 2 Attach Power cord and turn power on at the wall switch.
- Page 6 SPRAY UNIT MAINTENANCE GUIDE STEP 1 Clean the spray unit with a cloth. Avoid using anything abrasive. Windex and Mr. Sheen are useful products for maintaining the gloss finish of your spray unit. STEP 2 Clean the filter. Remove the filter from the base of the unit and rinse in warm water.
- Page 7 SPRAY APPLICATOR MAINTENANCE GUIDE Maintenance on the Applicator must be run at the end of each day the applicator is used. STEP 1 Remove hose. STEP 2 Unscrew solution cup and empty any excess solution. It is recommended that this be done over a sink or a wet area. STEP 3 Rinse the empty solution cup with warm water.
- Page 8 SECONDARY SPRAY APPLICATOR MAINTENANCE Secondary maintenance must be run on the applicator every 2-4 weeks or when required. Secondary maintenance will deliver a more thorough clean to prevent or clear any blockages and uphold the applicators performance. ADJUSTABLE O-RING SEAL NOZZLE SPRING RETAINING...
- Page 9 SECONDARY SPRAY APPLICATOR MAINTENANCE TROUBLESHOOTING - BLOCKED NOZZLE OR CONTINUOUS SPRAY WITHOUT PRESSING THE TRIGGER STEP 1 Locate and unscrew retaining ring. To release; turn retaining ring in an anti-clockwise motion. STEP 2 Gently pull on the adjustable nozzle to remove. STEP 3 Gently remove the metal disc and spring.
-
Page 10: Troubleshooting
TROUBLESHOOTING If you are experiencing problems with this unit, in the first instance please carefully read the relevant sections of the User Manual and the Troubleshooting section below. If you cannot solve your problem please contact your supplier for further assistance. PROBLEM CAUSE WHAT TO DO... - Page 11 TROUBLESHOOTING PROBLEM CAUSE WHAT TO DO The spray is Solution in cup low Add solution to the cup spluttering Control dial is set too low Increase power Nozzle may be blocked Perform secondary maintenance Air pressure is low Increase air pressure Clean filter in machine No solution is Nozzle may be blocked...
-
Page 12: Tips And Tricks
TIPS & TRICKS PROBLEM CAUSE WHAT TO DO The solution Too much tanning solution has been Dab area gently with a clean dry sprayed onto the skin towel and re-spray lightly, blending is sitting on the tan in the skin or Client has not prepared their skin beading on correctly i.e. -
Page 13: Warranty Information
WARRANTY INFORMATION IMPORTANT Please keep your proof of Purchase and User Manual in a safe place as you will require these to make a warranty claim. Prior to making a claim you should read through the trouble shooting section in the manual and contact your supplier. All warranty claims should be made directly to your supplier. -
Page 14: Warranty Return Form
WARRANTY RETURN FORM TROUBLE SHOOTING Please include this form when returning warranty items. Customer Information: DATE: CUSTOMER NAME: BUSINESS NAME: CONTACT NUMBER: E MAIL: ADDRESS : (PO Box Not Accepted) I give my authority for goods to be left at the postal address mentioned above: Please circle YES / NO Please Note: If circled Yes, no liabillity will be taken Product Information: PRODUCT NAME:... -
Page 15: Safety Information
SAFETY INFORMATION The Tanning Essentials Pro Spray Tan System is designed and built to the highest standards. This system must be used with professional spray tan solution, kept away from water, be connected to the correct power supply at all times and must not be operated by children. - Page 16 10 Apex Court, Thomastown, VIC. 3074 Australia PHONE: 1300 877 677 (within Australia) INTERNATIONAL PHONE: +613 9463 8900 EMAIL: sales@tanningessentials.co www.facebook.com/tanningessentials WEB: www.tanningessentials.co www.youtube.com/user/TanningEssentials www.tanningessentials.co ......................................AFFIX POSTAGE STAMP HERE Tanning Essentials 10 Apex Court, Thomastown, VIC. 3074 Australia...