Related Manuals for tanning essentials Turbo Twister Spray Station
Summary of Contents for tanning essentials Turbo Twister Spray Station
- Page 1 SIMPLE TANNING SYSTEMS built purposely for the perfect spray tan SPRAY STATION - TRAINING MANUAL www.tanningessentials.co AUSTRALIA | CHINA | UNITED KINGDOM | USA...
- Page 2 WELCOME Thank you for choosing the Tanning Essentials Turbo Twister Spray Station. Please read the following to help assist you with the set up and maintenance of your spray station. QUICK SET UP GUIDE The Tanning Essentials Turbo Twister Spray Station contains:...
- Page 3 FRONT OF SPRAY STATION Top Fan Unit Aluminium Side Panels Middle Fan Unit Holder Filter Opening Bottom Fan Unit ON / OFF Switch Inbuilt Spray Tan System Anti-slip Comfort Floor Mat www.tanningessentials.co AUSTRALIA | CHINA | UNITED KINGDOM | USA...
- Page 4 BACK OF SPRAY STATION Female Socket Male Socket Fan Unit Handle Fan Unit ON / OFF Unit Switch Metal Bar Holder Screws Hose Connection (Side of Base Unit) Base Unit Handle and Filter Access Foot Pedal / Power Connection Point www.tanningessentials.co AUSTRALIA | CHINA | UNITED KINGDOM | USA...
- Page 5 SPRAY STATION BASE Metal bar Placement Guide Fan Unit Placement Guide Foot Pedal / Power ON / OFF Connection Point Switch Hose Connector Base Unit Handle and Filter Access SPRAY APPLICATOR Solution Dial (On Side) Adjustable Spray Nozzle Spray Trigger Handle Solution Cup Hose Connector...
-
Page 6: Tower Assembly
TOWER ASSEMBLY STEP 1 Lay the floor into position, the wide straight edge is the front. STEP 2 Using the handle, place the base unit on the back of the floor with the hollow side facing down. STEP 3 Locate your three fan units, picking them up with the handles located on the back, place the first fan unit onto the base, lining it up with the grooves –... - Page 7 TOWER ASSEMBLY STEP 5 Locate the aluminium sides and peel off the protective film. Insert the aluminium sides in between the fan units and the loosely screwed-on metal support bars. Once the side panels are inserted, starting from the top, tighten the screws to clamp the side panels tightly into position.
- Page 8 TOWER ASSEMBLY STEP 8 Attach the hose to the Rapid spray unit by pulling the connection back exposing the prongs and ensuring the “U” groove is facing up. Line up the prongs to meet the unit, push the connection in to cover the fitting and screw in clockwise until firmly in place and sitting straight.
- Page 9 RAPID APPLICATOR FUNCTIONS The Rapid applicator has adaptable spray patterns: Horizonatal Vertical The most common setting is 2 or 3. The “C” setting is designed for cleaning your applicator. www.tanningessentials.co AUSTRALIA | CHINA | UNITED KINGDOM | USA...
- Page 10 RAPID APPLICATOR MAINTENANCE RAPID APPLICATOR MAINTENANCE ADJUSTABLE O-RING SEAL NOZZLE RETAINING FLUID FLUID RING NOZZLE NEEDLE TROUBLESHOOTING - BLOCKED NOZZLE OR CONTINUOUS SPRAY WITHOUT PRESSING THE TRIGGER STEP 1 - Locate and unscrew retaining ring. To release; turn retaining ring in an anti-clockwise motion. STEP 2 - Gently pull on the adjustable nozzle to remove.
- Page 11 SPRAY STATION TROUBLESHOOTING AND MAINTENANCE If you experience problems with this unit, in the first instance please carefully read the relevant sections of this User Manual and Troubleshooting section. If you cannot solve the problem please contact your supplier for further assistance. PROBLEM CAUSE WHAT TO DO...
-
Page 12: Changing The Fuse
CHANGING THE EXTRACTION FILTERS The filters are disposable and replacement filters are ordered in a 2 pack (so you will require 2 packs for this unit). It is recommended that filters be changed after 100+ sprays. STEP 1 Press the red button on the side of the system and swing open the front of the unit. - Page 13 RAPID TROUBLESHOOTING & MAINTENANCE If you experience problems with the applicator, in the first instance please carefully read the relevant sections of this User Manual and Troubleshooting section. If you cannot solve the problem please contact your supplier for further assistance. PROBLEM CAUSE WHAT TO DO...
-
Page 14: Warranty Information
WARRANTY INFORMATION www.tanningessentials.co AUSTRALIA | CHINA | UNITED KINGDOM | USA... - Page 15 WARRANTY RETURN FORM Please include this form when returning warranty items. Customer Information: DATE: CUSTOMER NAME: BUSINESS NAME: CONTACT NUMBER: E MAIL: ADDRESS : (PO Box Not Accepted) I give my authority for goods to be left at the postal address mentioned above: Please circle YES / NO Please Note: If circled Yes, no liabillity will be taken Product Information: PRODUCT NAME:...
-
Page 16: Safety Information
SAFETY INFORMATION www.tanningessentials.co AUSTRALIA | CHINA | UNITED KINGDOM | USA...