Transmission - jcb 3CX Service Manual

Section 1
4 - 17
Service Tools (cont'd)
Section F - Transmission
892/01094 Transmission Jack
When removing the Powershift gearbox use of a special
transmission jack is strongly recommended. This jack
can also be used when removing Synchro Shuttle
gearboxes.
Note that the jack must be used with special support
plates, see below.
Powershift - Support plates, for use with transmission jack,
Manufacture locally, for details see Section F, Service
Tools.
892/01082 - Powershift - Assembly Cradle, for details see
Section F, Service Tools.
Powershift - Gearbox hydraulic pump removal tools, allow
pump to be removed with torque converter housing fitted to
gearbox. Manufacture locally, for details see Section F,
Service Tools.
892/01083 Powershift - Assembly tool, transfer gear.
892/01084 Powershift - Transfer gear, bearing assembly.
892/01085 Powershift - Seal fitting tool
*
9803/3280
General Information
823/10420
Comprises of:
823/10421
823/10422
823/10423
823/10424
823/10425
823/10426
892/01096
Thrust Washer Kit - Powershift
gearbox - Layshaft clutch
Washer thickness mm
4.3
4.4
4.5
4.6
4.7
4.8
Speed Sensor Test Harness -
Powershift Gearbox
711300
Section 1
4 - 17
A402680
Issue 4*