Sony DVP-CX777ES Integration Notes page 3

H L C
OME OGIC ONFIGURATION
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
"<Select>"
o
"<User Defined>", etc.
o
Devices
Communication Devices Name
Type
Communication Type
Location
COM Port
DVD Players Name
Device Type
Location
COM Device
Other Audio Devices/Interfaces Name
Template
Default Device
<Audio Zone Controllers> Add an Audio Zone Controller: refer to the Integration Note for your particular receiver or zone controller. (See Note 2)
Notes:
1. If the DVD player is going to be connected to an Escient DVDM-100 then refer to the integration note for the Escient.
2. You must add an Audio Zone Controller to get a tab in the Viewer interface.
For compatible receivers and zone controllers, refer to the Integration Note for the particular system.
For a single zone where the DVD player is connected to a basic amp, refer to the Single Zone Audio Integration Note.
D
ETAILS
Select the appropriate item from the list (or drop-down) in the Configurator.
Type in the desired name for the item.
Variable Name
<User Defined> (Default: Sony DVD)
Serial Port
Standard Connection
<User Defined> (Not Required)
<Select>
<User Defined> (Default: Sony DVP-CX777ES)
Sony DVP-CX777ES
<User Defined> (Not Required)
<Select> (Default: Sony DVD)
<User Defined> (Default: New Interface)
DVD (Carrousel + Select)
Sony DVP-CX777ES
Setting
3 of 4
Comments
See Note 1