WOODLAND SCENICS Just Plug JP5680 Instructions

JUST PLUG
INSTRUCTIONS

BEFORE YOU PROCEED

Read through instruction booklet entirely. Comply with all operating instructions. Failure to follow instructions could result in
damage to the product or personal injury. Do not modify or tamper with any electronic components. Combine products from
the Just Plug Lighting System only, unless otherwise instructed. Save these instructions.

GETTING STARTED

The Just Plug Lighting System is made up of Ports, Plugs and Cables. This simple connection system makes it quick and easy
to light one building or an entire city.

How to Connect a Plug to a Port

Align locking tabs on Plug with front of Light Hub, Sequencing Light Hub, or Expansion Hub. Insert Plug into Hub Port until
locking tabs click into place. (Fig. 1)

How to Remove a Plug from a Port

Grasp top edge of Plug and pull firmly.
LIGHTS & HUB SET, LIGHT HUB AND SEQUENCING LIGHT HUB
Light Hubs and Sequencing Light Hubs supply power to Just Plug LED Lights.
• To power Light Hub and Sequencing Light Hub, insert Power Supply (JP5770) plug into
POWER IN Port (or use a 16VAC train power pack, Fig. 5).
• Do NOT remove CTRL Port Plug (unless using Auxiliary Switch (JP5725) or connecting
to DCC).
• Plug LED Lights (JP5736-JP5749, JP5754, JP5755), Port Sharing Device (JP5681),
Linker Plugs (JP5685) or Built-&-Ready Buildings into LIGHT Ports.
• Lights & Hub Set includes two Stick-On Lights. To secure Lights in building, remove
release paper from back of LED and stick on where desired.
• Rotate Dimmer Controls to adjust light brightness (adjusts from very bright to off).
• Use dedicated spaces on front of Hub to label according to your lighting configuration.
• To mount Hub, use included Tape or Screws.
SEQUENCING LIGHT HUB – HOW TO SEQUENCE LIGHTS
The Sequencing Light Hub automatically switches LED lights on and off in sequence,
just like they would in a real city's nightscape. When multiple Sequencing Light Hubs are
used on a layout an even more random effect can be achieved.
To initiate sequence:
1. Turn ON/OFF switch to ON.
2. On SPEED Dial, "S" = Slow / "F" = Fast. Rotate Dial to increase or decrease the speed
of lights turning on and off.
1
Flip switch
to ON position to
Sequence Lights.
Turn OFF to stop
sequence
Slowest Speed
WOODLAND SCENICS
SEQUENCING LIGHT HUB - JP5680
®
SPEED Dial
indicator
Fastest Speed
Developed in USA
WOODLAND
Manufactured by
®
LIGHTS & HUB SET (JP5700) AND LIGHT HUB (JP5701)
screw
hole
2
Rotate Dial
to alter speed of
sequence
screw hole
Made in China K3 ©2018 O CO
® PO BOX 98 LINN CREEK, MO 65052 • woodlandscenics.com
Fig. 1
Locking
Plug
LED Stick-On Light, Nano
LED Light, Port Sharing
Device, Linker Plugs,
Power
Built-&-Ready Buildings
Supply
CTRL
Port
Plug
1a 1b 1c 1d
Dimmer Controls
SEQUENCING LIGHT HUB (JP5680)
Power
Supply
CTRL
Port
Plug
2a 2b 2c 2d 2a 2b 2c 2d 1a 1b 1a 1b
Dimmer Controls
Ports
Tabs
Light Ports
screw
hole
1
Light Ports
screw
hole
1c 1d 1c 1d
2 1 2 1