Honda CB300R 2019 Owner's Manual page 89

Oil filter cover
Oil filter
cover bolts
Oil filter cover bolts
Install a new oil filter with its "OUT-SIDE"
7.
mark facing out.
Install the oil filter spring into the oil filter
8.
cover, and then install the oil filter cover
with a new gasket.
Install and tighten the oil filter cover bolts.
9.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Gasket
"OUT-SIDE"
mark
Oil filter
Spring
Engine Oil Changing Engine Oil & Filter
u
Install a new sealing washer onto the
10.
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
Fill the crankcase with the recommended
11.
oil ( P. 64, P. 148) and install the oil fill
2 2
cap.
Required oil
When changing oil & engine oil
filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
Check the oil level.
12.
Check that there are no oil leaks.
13.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
P. 84
2
87