Honda CB300R 2019 Owner's Manual page 31

Setting Mode A
If the buttons are not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the buttons are not pressed for about 30
seconds, items in the process of being set will
be discarded and only items that were set
and finalized will be applied. Only if the
ignition switch is turned to the OFF position,
items in the process of being set and those
that are finalized will be applied.
1 Clock setting:
Turn the ignition switch to the ON position.
a
Select the odometer, tripmeter A or
b
tripmeter B.
(P.20)
Press and hold
c SEL
the hour digits start flashing.
Press button until the desired hour is
SEL
d
displayed.
Press and hold
u
the hour quickly.
and buttons until
SET
button to advance
SEL
Continued
29