The Magic Word; Voice Dialing - Sony Ericsson Z520c User Manual

4 If the recording sounds OK to you
} No
If not and repeat step 3.
To record another voice command for
} New Voice Cmd. } Add
a contact
again and repeat steps 2-4 above.
Caller name
Hear your recorded contact name when
you receive a call from that contact.
To turn the caller name on or off
} Settings }
the
Control } Play Caller

Voice dialing

Start voice dialing from standby using
the phone, a portable handsfree, a
Bluetooth headset or by saying your
magic word.
To voice dial from the phone
1 From standby, press and hold one
of the volume keys.
2 Wait for the tone and say a recorded
name, for example "John mobile".
The name is played back to you and
the call is connected.
To voice dial with a handsfree
1 From standby, press and hold the
handsfree button, or press the
Bluetooth™ headset button.
This is the Internet version of the user's guide. © Print only for private use.
}
Yes.
} Voice
General tab
Name.
2 Wait for the tone and say a recorded
name, for example "John mobile".
The name is played back to you and
the call is connected.

The magic word

Record and use a voice command as
a magic word to activate voice control
without pressing any keys. The magic
word can only be used with a wired
portable or vehicle handsfree.
Magic word is not supported by
Bluetooth™ devices.
Choose a long, unusual word or phrase
that can easily be distinguished from
ordinary background speech.
To activate and record the magic word
1 Attach vehicle or wired portable
handsfree device.
Bluetooth™ devices do not support
magic word.
2 } Settings }
the
Control } Magic Word }
3 Instructions appear.
for the tone and say the magic word.
4 } Yes
to accept or
a new magic word.
5 Instructions appear.
select the environments in which your
magic word is to be activated.
} Voice
General tab
Activate.
}
Continue. Wait
} No
to record
} Continue
and
Calling 27