Table of Contents
Advertisement
DISPLAY
Once initially powered on, the display screen (including the key light) is on full display for 3s. and
then the refrigerator runs according to setting 3.
Normal operation display
In case of a failure, the appropriate LED light will flash in combination to determine the failure code
(in recycling display). In case of no failures, the actual operation position of refrigerator will be on
display.
TEMPERATURE SETTING
Each time the temperature setting button A is pressed once, the temperature setting changes one
time. After the temperature setting has been completed, the refrigerator will run according to the
set value after 25s. From left to right, the temperature is lower.
The shift regulation is:
Setting 1
Setting 2
Setting 3
Setting 4
Setting 5
THE STANDBY CONTROL FUNCTION
When the refrigerator is running, press the temperature setting button(A) for 3s, the refrigerator
will enter into standby mode, and the standby indicator will illuminate
When the refrigerator is in standby mode, short press the temperature setting button(A), the
refrigerator will resume normal running, and the standby indicator light goes out
Setting the freezer temperature
Turn the controls to adjust the freezer temperature.
Place frozen food into the freezer as quickly as possible after purchase.
Pay attention to the storage time on the food packaging instructions. The storage life of frozen
foods varies and the recommended storage time should not be exceeded.
When it is set at colder position, the temperature of freezing chamber will be colder , but it causes
the cooling capacity sent to refrigerating chamber to be lower
16
Advertisement
Table of Contents
