Table of Contents
Advertisement
2nd row - IN/OUT POINTS SET/NAVIGATE (left to right)
F - GO TO IN Point - moves the playhead to the IN point location
G - IN POINT Time - displays the IN point time
H - MARK IN Point button - tap/click to set the IN point
I - MARK OUT Point button - tap/click to set the OUT point
J - OUT POINT Time - displays the OUT point time
K - GO TO OUT Point - moves the playhead to the OUT point location
F
NOTE:
For a manual / keyboard entry of In/Out points DOUBLE CLICK on any of the digit pairs in the IN and OUT
POINT DISPLAY and enter a desired numeric value.
3rd row - TIMELINE BAR
Tap/click anywhere on the Timeline Bar to move the playhead to that location. It is indicated by a red line.
A numeric display bellow the Timeline Bar indicates the current time/location of the playhead.
To set the IN or OUT point to that location tap/click the MARK IN or MARK OUT buttons above.
The IN/OUT point is set and the indicator moves to that location, visually identifying the In/Out position.
Use this procedure to set your in out points roughly and fine tune the positions using the 4th row controls.
4th row - VIDEO NAVIGATION CONTROLS (left to right)
L - GO TO FRONT - moves the playhead to the beginning of the media
M - REWIND 1 SEC. - moves the playhead 1 second towards the beginning of the media
N - STEP BACK 1 FRAME - moves the playhead 1 frame towards the beginning of the media
O - PLAY - plays the media in the PREVIEW Video player on top left from the current playhead location
P - STEP FORWARD 1 FRAME - moves the playhead 1 frame towards the end of the media
Q - FORWARD 1 SEC. - moves the playhead 1 second towards the end of the media
R - GO TO END - moves the playhead to the end of the media
MEDIA IN/OUT POINTS SETUP PROCEDURE
1. Open the Media In/Out Editor
2. Tap/click on the timeline to position the playhead at a desired In Point location
3. Use Video Navigation control elements to fine tune the In Point location
4. Tap/Click the Mark In button
5. Repeat 2. and 3. to locate the Out Point
6. Tap/Click the Mark Out button
7. Tap /Click the GO TO IN Point button
8. Tap /Click the PLAY button to preview the media playback
9. Tap /Click the EXIT In/Out Points Editor button to go back to the Media List View.
Page 18
G
H
L
M
N
I
J
TIMELINE BAR
O
P
Q
K
R
Advertisement
Table of Contents
