1. Precautions
1-1 Precautions for the Service
Use the standard parts when replacing the electric parts.
– Confirm the model name, rated voltage, rated current of the electric parts.
When repairing the equipment, connection of the harness parts must be firm and solid.
– A loose connection may cause noise or other malfunction.
When assembling and disassembling the equipment while it is laid down, lay it on soft cloth.
– Otherwise it may scratch the back of the exterior of the product.
Remove dust or dirt completely from the housing block, wiring block and service parts during repair.
– This helps prevent the danger of fire caused by tracking or short circuit.
Check the status of the components' assembly after repair service.
– The status must be the same as before the repair service.
Disconnect all powers including remote control before repair.
Follow the appropriate lockout / tagout procedure to prevent inadvertent power connection.
Caution
If you do not disconnect power before repair, can cause death or serious injury.
Samsung Electronics
1-1