Table of Contents
Advertisement
Quick Links
USER and MAINTENANCE MANUAL 6110 A3 and 6110 A4
Manufacturer: Siem Nova S.r.l. Legal and operational offices 20087 ROZZANO (Milano) MADE IN ITALY
Product: SURGICAL ASPIRATOR MOD: 6110-A3 SIEM and 6110-A4 JUNIOR
ASSISTANCE
Read the instruction manual before using the device.
This manual must be kept with the device for later reference.
SIGNS AND SYMBOLS
This symbol indicates the
compliance with the
essential requirements of
the Directive 93/42/ EEC
of 14 June 1993
concerning medical
devices. Reference IMQ
Spa - Milan
This symbol indicates the
date of production (four
digits for the year and two
digits for the month).
This symbol indicates the
manufacturer.
This symbol indicates that
interferences may occur in
the vicinity of equipment
marked with this symbol
This symbol indicates the
humidity limitation for
operation, transport and
storage
This symbol indicates to
keep the device away from
sunlight
This symbol indicates do
not dispose the device
together with unsorted
municipal waste (for EU
only).
PRESSURE MEASURE UNIT CONVERSION TABLE
Legenda: bar, KPa, cm Hg, cm H2O are all measure unit of pressure (vacuum)
bar
1 bar
1
1 KPa
0.01
1 cm Hg
0.133
1 cm H2O
0.098
1
APPLICATION
The suction equipment 6110-A3 SIEM and 6110-A4 JUNIOR are approved exclusively for the use as described in this user and
maintenance manual. Siem Nova can only warranty the safe functioning of the equipment when the 6110-A3 SIEM and 6110-A4
JUNIOR are used with the Siem Nova accessories.
Please read and observe these warning and safety instructions before use the device.
Please note that these instructions for use are a general guide for the use of the product.
Medical matters must be addressed by a physician.
Updated: 2018-03-19
This symbol
indicates an
insulation class I
device.
This Symbol
indicates a type B
applied part.
This symbol
indicates alternate
current
This symbol
indicates a single
use device. Do not
reuse the device.
This symbol
indicates the
atmospheric
pressure limitation
for operation,
transport and
storage.
This symbol
indicates to keep the
device dry.
KPa
cm Hg
100
75.006
1
0.75006
1.333
1
0.00098
0.07355
reproduction forbidden
This symbol indicates
to follow instructions
for use.
This symbol indicates
to consult instructions
for use.
This symbol indicates
the foot switch.
This symbol indicates a
CAUTION or WARNING
associated with the
device.
This symbol indicates
the temperature
limitation for
operation, transport
and storage.
This symbol indicates
the protection against
harmful effects due to
IP33
ingress of solid foreign
objects and against
harmful effects due to
the ingress of water.
This symbol indicates
do not immerse in
water or other liquid
cm H2O
1019.72
10.1972
13.595
1
Pag: 1 di 10
Advertisement
Table of Contents
Related Manuals for Siem Nova 6110-A3 SIEM
Summary of Contents for Siem Nova 6110-A3 SIEM
- Page 1 APPLICATION The suction equipment 6110-A3 SIEM and 6110-A4 JUNIOR are approved exclusively for the use as described in this user and maintenance manual. Siem Nova can only warranty the safe functioning of the equipment when the 6110-A3 SIEM and 6110-A4 JUNIOR are used with the Siem Nova accessories.
- Page 2 If you are dependent on the device for airway suctioning and a breakdown can lead to a critical situation, you must have another suitable device available. Only use the 6110-A3 SIEM and 6110-A4 JUNIOR suction pump on the person for whom they were ordered and only for theirs intended use.
- Page 3 NOTE: These accessories sets are our standard accessories but the configuration can be different on customer request CAUTIONS: The 6110-A3 SIEM and 6110-A4 JUNIOR device are to be set up in such a way, that a separation from the mains supply can be easy.
- Page 4 USER and MAINTENANCE MANUAL 6110 A3 and 6110 A4 Manufacturer: Siem Nova S.r.l. Legal and operational offices 20087 ROZZANO (Milano) MADE IN ITALY Product: SURGICAL ASPIRATOR MOD: 6110-A3 SIEM and 6110-A4 JUNIOR 2.7 Description EQUIPOTENTIAL SOCKET VACUUM GAUGE SOCKET WITH...
- Page 5 FILTER must be replaced immediately 5 OPERATING INSTRUCTIONS CAUTIONS: The 6110-A3 SIEM and 6110-A4 JUNIOR device are to be set up in such a way, that a separation from the mains supply can be easy.
-
Page 6: Troubleshooting
1. Check the equipment before use following the instruction in chapter 4 "Preparation for use". 2. insert the power cord plug in the 6110-A3 SIEM and 6110-A4 JUNIOR socket and then to the mains socket available. to activate the equipment with the foot switch (if present or requested): insert the foot switch tube on the foot switch socket set the ON/OFF/ON switch to the symbol indicated, then press the pneumatic pad with the foot;... - Page 7 The 6110-A3 SIEM and 6110-A4 JUNIOR suction pump should not require preventive maintenance if used following the indication of this manual. If a 6110-A3 SIEM and 6110-A4 JUNIOR pump fails within the warranty period due to a manufacturing defect, it will be replaced. REMARK: The defective equipment will need to be returned to the supplier.
-
Page 8: Technical Specifications
The operator must consider that the use of the 6110-A3 SIEM and 6110-A4 JUNIOR in high quote, in this condition the value of vacuum could reduced, do not use the 6110-A3 SIEM and 6110-A4 JUNIOR over 3000 mt from the sea level (9842 ft). -
Page 9: Electromagnetic Compatibility
LAN / WLAN, walkie-talkies (two-way radios) and cordless telephones sets could affect the 6110-A3 SIEM and 6110-A4 JUNIOR pump. A safety distance of min. 3.3 ft (1 m) to the equipment is recommended. -
Page 10: Spare Parts
To better ensure compliance with this warranty we recommend the exclusive use of spare parts supplied by Siem Nova srl. The right to the replacement of faulty parts will not be recognized by Siem Nova srl if any work has been made on the equipments by unauthorized persons.
Need help?
Do you have a question about the 6110-A3 SIEM and is the answer not in the manual?
Questions and answers