Technical Specifications - Matco Tools MATACTT1 Owner's Manual

Tig torch

Hide thumbs

Table of Contents

Electromagnetic Field

-Electromagnetic fields can interfere with various electrical and electronic devices such as

pacemakers.

-Consult your doctor before using any electric arc welder or cutting device.

-Keep people with pacemakers away from your welding area when welding.

-Do not wrap cable around your body while welding.

-Wrap the torch and ground cable together whenever possible.

-Keep the torch and ground cables on the same side of your body.

Shielding Gas Cylinders Can Explode

High pressure cylinders can explode if damaged, so treat them carefully.

-Never expose cylinders to high heat, sparks, open flames, mechanical shocks or arcs.

-Do not touch cylinder with the torch.

-Do not weld on the cylinder

-Always secure cylinder upright to a cart or stationary object.

-Keep cylinders away from welding or electrical circuits.

-Use the proper regulators, gas hose and fittings for the specific application.

-Do not look into the valve when opening it.

-Use protective cylinder cap whenever possible.

1.5 Proper Care, Maintenance and Repair

-Always have power disconnected when working on internal components.

- Do not touch or handle PC board without being properly grounded with a wrist strap. Put PC board

in static proof bag to move or ship.

-Do not put hands or fingers near moving parts such as drive rolls of fan.

USE AND CARE



Do not modify this unit in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the equipment. There are specific applications for which this

unit was designed.



Always check for damaged or worn out parts before using this unit. Broken parts will affect

the operation. Replace or repair damaged or worn parts immediately.



Store idle. When this unit is not in use, store it in a secure place out of the reach of children.

Inspect it for good working condition prior to storage and before re-use.