Advertisement
LCD Digital Display Screen & Control
Mode Indication Cursor: indicates the four operation modes. Make changes through the MODE button.
Target ID Legend: Indicates the wanted target metals. When detecting a metal target, the target ID cursor
(upper scale) will appear on the LCD display.
Target ID Cursor (upper scale): Scale consists of the 12 upper segments. When the target ID cursor is lit
on the LCD display, it indicates the probable type of the detected metal.
Target Discrimination Cursor (lower scale): Scale consists of the 12 lower segments. It indicates the
material types of the detected target objects. In the ALL-METAL mode, the 12 segments are all lit. While in
other modes, when a certain target discrimination cursor is extinguished, which indicates this metal type
isn't in the detection range, and it indicates that this metal type is eliminated.
Coin Depth Cursor: Indicates detected object depth: contains 2",4", 6", 8''+ segments. It indicates the
approximate depth of the object found.
Sensitivity Indication 'Sens' Cursor: Divided into 8 segments. When they are all lit, the sensitivity is at
the highest setting / value. Adjust the sensitivity by pressing the SENS "+" or SENS "–" buttons.
Pinpoint Cursor: Press and hold down the "PINPOINT" button, the PINPOINT cursor will be lit on the
LCD display screen and the detector goes into 'NON-MOTION' Mode, it applies to locate the detected
object accurately once you have 'zeroed in' on your detection.
Battery Power Cursor: Four segments indicate the battery power.
*Pinpoint mode can also be referred to as 'Non-Motion' Mode.
*In the PINPOINT mode, the target discrimination cursor is useless.
*In the PINPOINT mode, the sensitivity adjustment operation is useless.
*In the PINPOINT mode, the depth indication cursor also turns into the signal strength cursor. The depth
indication cursor, cooperating with the 6-segment upper cursor, indicate the distance between the target
object and the search coil.
*Please note, factors including the size, angle and material of the target found, along with the composition
and type of the soil, will all affect the indication values.
www.PyleAudio.com
Advertisement
