Scissor Lift Chocks (If Equipped); Tie Down Attach Points - JLG Triple-L 248 Operation & Safety And Service Manual

3.2 SCISSOR LIFT CHOCKS (IF EQUIPPED)

The scissor lift chocks may be pre-installed by the factory
in certain trailer models to accommodate certain lifts man-
ufactured by JLG Industries, Inc. (JLG). The Model UT49
or Model 449 are designed to haul a JLG Model 1932E2
Scissor LIft.
The scissor lift chocks are designed to properly position a
JLG scissor lift within the trailer in order to achieve the
proper tongue weight. The chocks are mounted to the
A T SCISSOR LIFT FRONT :
3121224
SECURE TO TRAILER.
Figure 3-2. Tie Down Attach Points
– Triple-L-Trailer –
SECTION 3 - ACCESSORIES
trailer floor and provide a means of positioning the scissor
lift in the left/right and front/rear directions.
THE SCISSOR LIFT CHOCKS ARE INTENDED FOR USE ONLY
FOR SPECIFIED SCISSOR LIFTS THAT ARE MANUFACTURED BY
JLG INDUSTRIES INC.
NOTE: When unloading, the trailer deck must be fully low-
ered onto the ground. The means of securing the
scissor lift must be removed and the scissor lift must
be carefully driven off the trailer deck.
A T SCISSOR LIFT REAR:
TIE DO W NEACHSIDE
TOSCISSO R LIFT LUG .
3-3