Initial Start-Up; Insert The Batteries; Install App And Pair-Up - Greater Goods 0220 User Manual

Initial Start-Up

Insert the Batteries

Open the battery door in the back of the scale.
Remove insulating strip from beneath the battery (if
fitted) or insert batteries (4 x 1.5V AAA) observing the
polarity signs (+ and -) inside the battery compartment.
* The digits "HELLO" will be shown on the LCD.
Close the battery door and wait until the digits
"0: 0.0lb:oz" are shown on the LCD.
* The scale will turn off about 120s if there is no operation after the
batteries are installed.
CAUTION
When the symbol " " appears, the device will power off in three seconds. Then you shall replace with a
new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with
the new one.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries.
6

Install App and Pair-Up

With the advanced Bluetooth 4.0 technology applied, the mobile or portable equipments,
which are equipped with Bluetooth function in line with BLE Technical Specifications as
well as BLP Protocol established by global organization Bluetooth SIG, are capable to
receive your personal health data.
Just simply install the specially-designed app and pair up your scale with
your mobile or portable equipments. Then you may enjoy the comprehensive health
solution provided by Transtek.
Note: It is only available for the device which supports Bluetooth 4.0 technology.
The APP " GG Baby Scale " can be freely downloaded at the APP Store, you may search
and install it in your smartphone.
Turn on Bluetooth and APP, then touch " SCAN " you will see a " BS1711-B " device
name. The device will connect with your smartphone automatically.
Initial Start-Up
7