Ericsson T18LX User Manual page 38

Placing a Calling Card Call
 Enter or recall the phone number you want to call.
 Press and hold
the active calling card are shown in the display.
 Release the key after the number has been displayed.
 If you are using stops between numbers, you must
press <(6
sequence of numbers. If you use pauses, the num-
bers are sent automatically after the specified length
of time chosen in the Domestic or International
calling pattern.
Default Card
The Default Card submenu allows you to assign one
calling card as your default calling card. To select which
calling card is your default calling card, do the following:
 Press Ñ or Ô from the Standby screen to access the
main menu.
 Press
<(6
lighted.
 Press Ñ or Ô until Default Card is highlighted.
 Press
<(6
 Press Ñ or Ô until Card One or Card Two is
highlighted (the current selection will be indicated
by a filled radio button).
34
<(6 . The calling card number and
or any number key to send the next
when the PHONE LISTS menu is high-
to open the Default Card submenu.
 Press
<(6
Phone Number
The Phone Number submenu is used to display the
mobile phone number(s) that are programmed into your
phone.
The currently active phone number will be selected
when you enter the Phone Number submenu. To select
a different phone number, press Ñ or Ô until the num-
ber you want to select is highlighted. Press
the phone number.
Note! Contact your service provider to determine if your
phone supports multiple phone numbers/subscriptions.
The ability to add a second subscription is an optional
feature that may be allowed by your service provider. If
available, this offers you the option of adding a second
telephone number to your mobile phone so that it will
be more useful in areas to which you frequently roam.
Your second subscription may be obtained from your
current mobile service provider or from a second service
provider. It is particularly useful where international
roaming is not yet available. If you have multiple sub-
scriptions, you may switch phone numbers by doing the
following:
 Press Ñ or Ô from the Standby screen to access the
main menu.
 Press
<(6
lighted.
 Press Ñ or Ô until Phone Number is highlighted.
to select the card you want to use.
<(6 to select
when the PHONE LISTS menu is high-
Menu Descriptions