Battery; Main Board - Sony NWZ-A826 Service Manual

3-3.

BATTERY

Note 1: This illustlation sees the battery assy from back.
Note 2: When removing battery,
don't remove by the impossible power.
battery
adhesive sheet (BATT)
Note 3: Adhesive sheet (BATT) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (BATT) is removed.
3-4.

MAIN BOARD

Note 1: This illustration sees the MAIN board from the back.
spacer (line in)
screw
(B1.4)
sheet (WM-P)
MAIN board
spacer
(PWB-S)
cushion
(PWB)
spacer
(BT-P)
shield plate
HP flexible
print board
sheet key (CN602)
(CN301)
BATT wire sheet
BATT wire sheet
cushion (PWB)
escutcheon (CN)
sheet (WM-P)
connector (CN601)
connector (board to board)
Note 2: Please install or
connector
(board to board)
spacer (line in)
connector (CN901)
NWZ-A826/A826K/A828/A828K/A829
spacer (line in)
connector
(CN901)
Note 4: When installing battery connector,
please be careful about the color
of the lead wires as shown in a figure
and install battery connector.
claw
cushion (WM-P)
remove connector
(board to board)
vertically.
Note 3: When installing battery connector,
lead wire
(black)
lead wire
(red)
battery connector
lead wire
(black)
lead wire
(red)
battery connector
please be careful about the color
of the lead wires as shown in a figure
and install battery connector.
7