Physical Description And Compatibility; Physical Specifications - Ericsson LBI-38965 System And Installation Manual

LBI-38965

2. PHYSICAL DESCRIPTION AND COMPATIBILITY

This section outlines the specifications, depicts the physical architecture, and provides compatibility information for the
BCU/CAL.
Software for the BCU and the CAL are merged into one software package. Feature encryption allows or disallows BCU
or CAL functionality. The two products can also run on the same hardware platform with minor additions for CAL.

2.1. PHYSICAL SPECIFICATIONS

General Specifications
BCU/CAL:
ELMA VME System 12 7-slot enclosure with PSU and integral cooling fan
TVME 147 single-board computer with TVME 712/M Transition Module
Formation WANServer fv5310
Maxtor MXT-1240S 1.2 GB 3½" half-height 8.5ms hard disk drive, internal
Teac FD235HS-711 1.44 MB 3½" half-height floppy disk drive, internal
Tape Drive (Optional with BCU only):
Archive/Maynard 4324NP 4/8 GB 3½" half-height 4mm digital audio tape (DAT) drive, internal
Console Terminal:
DEC VT100 or compatible console terminal
Terminal Servers (CAL only)
Emulex Performance Series P2516-SLTL (16 ports per terminal server)
Power Supply
BCU/CAL:
115/230 VAC, 47-63 Hz, 500 W
Physical (EGE Standard Cabinet)
BCU/CAL:
6 rack units: 26.67 cm (10.5 in.) high x 48.26 cm (19 in.) wide x 49.99 cm (19.68 in.) deep
Environmental
Storage Temperature:
Operating Temperature:
Operating Altitude:
Shipping Altitude:
Relative Humidity:
6
-40 to +85 C
0 to 40 C (ambient)
< 15,000 feet
< 50,000 feet
< 90% (non-condensing)