Table of Contents
Advertisement
**************************************************************
*
*
* Copyright (C) Ericsson GE Mobile Communications
*
*
*
**************************************************************
System boot complete: Wed May
Login:
USER INFORMATION
The Welcome banner and Login prompt indicate a successful software installation and system boot. At this point, the
operator should log into the unit under the "root" account to perform some first-time configuration operations.
4.2.2.1. First-Time Configuration
The following section describes the minimal set of system initializations that a user must perform to set up a BCU/CAL.
When the BCU/CAL software is first installed, three user accounts are initialized. Each account has a varying level of
system access security. The following table defines the initial accounts and their passwords, arranged in decreasing levels of
access. The login name and password are case-sensitive. These passwords can be changed from their default values, and new
accounts installed, using the passwd command. Any new accounts added will have the same level of access as the "user"
account.
Login
Password
root
root
admin
admin
user
user
Log onto the BCU/CAL under the "root" account. The console display will be similar to the following:
Login: root
Password:
Copyright (c) Integrated Systems, Inc., 1992.
Welcome to pSOSystem...
pSH+>
Welcome to the EDACS BCU/CAL.
Mountain View Road
Lynchburg, Virginia 24502
1993,1994
4 13:55:09 1994
Table 7 - Default System Accounts
Anything. This account is the "super-user."
Can access any BCS commands for system configuration.
Most restricted, particularly for the BCS commands.
Access Level
LBI-38965
*
*
*
*
*
*
27
Advertisement
Table of Contents
