Table of Contents
Advertisement
WorkHorse Read This First
7
Unpacking
When unpacking, use care to prevent physical damage to the transducer
face and connector. Use a soft pad to protect the transducer. When han-
dling any electronics modules, follow electrostatic discharge (ESD) preven-
tion measures.
7.1
Inventory
You should have the following items.
• ADCP transducer
• I/O cable
• AC power adapter (Monitor and Sentinel only)
• Deck Box and mounting plate (Mariner only)
• Ship Kit (includes manuals, software (WinSC and PlanADCP
(Sentinel only), WinADCP, RDI Tools, and Documentation CD),
and power cords)
• Shipping crate (please save all foam for reshipping use)
7.2
Visual Inspection of the WorkHorse
Inspect the WorkHorse using the following table and
Figure 2, page
Table 2:
Item
Transducer
I/O connector
I/O Cable
Deck Box (Mariner
only)
page 10
11. If you find any discrepancies, call RDI for instructions.
Visual Inspection Criteria
Inspection Criteria
Check the urethane face. There should be no gouges, dents,
scrapes, or peeling (see
Check the I/O connector for cracks or bent pins (see
Figure 2, page
11).
Check the cable connectors for cracks or bent pins.
Check the connectors on the rear panel for cracks or bent
pins.
Figure 1, page 11
Figure 1, page
11).
RD Instruments
and
Advertisement
Table of Contents
