Sony Ericsson K600 Working Instructions page 18

Frame & Camera Front continued
rd
3 snap hook.
th
4 snap hook.
Remove the frame and release the camera front from the
frame.
ASSEMBLY
Use the Flex Film Assembly Tool or your fingers to
connect the BTB connector of the camera front.
Place the frame on the PCB and make sure that the
camera front is in correct position on the frame.
Use your fingers to snap the frame to the PCB.
Tighten three new screws using 11 Ncm torque with the
Phillips bit.
Follow the Assembly instructions of sections 3.7 – 3.1
3/00021-1/FEA 209 544/94 A

Company Internal Sony Ericsson Mobile Communications AB
K600/K608/V600 Working Instructions - mechanical
18(33)