Table of Contents
Advertisement
190 Vehicle battery and fuses ›
zle switches off.
›
Remove the fuel nozzle and put it back on the pet-
rol pump.
›
Place the fuel cap on the fuel filler neck and turn it
in the opposite direction to the arrow until it clicks
into place.
›
Close the tank flap and click into place.
Troubleshooting
If a fuel other than diesel fuel has been refuelled to
the appropriate standard
›
Do not start the engine or switch on the ignition.
›
Seek the help of a specialist garage.
The diesel fuel nozzle cannot be correctly inserted
into the filler neck
›
If the fuel nozzle cannot be properly inserted into
the fuel filler neck, move it slightly back and forth
when inserting it.
Technical data
The fuel prescribed for your vehicle is indicated on a
sticker on the inside of the fuel filler flap.
The fuel tank has a capacity of about 66 litres, in-
cluding a reserve of approx. 6 litres.
The fuel supply has reached the reserve area.
Vehicle battery
›
Turn the tank cap in
the direction of the ar-
row and remove it.
›
Place the tank cap on
the tank flap.
›
Insert the fuel nozzle
into the fuel filler neck
up to the stop and re-
fuel.
›
Do not continue refuel-
ling after the fuel noz-
Diesel
A
Organic share as a
B
percentage
Vehicle battery and fuses
Vehicle battery
Functionality - Discharge protection
Possible causes of battery discharge
Frequent short-distance traffic.
▶
Low temperatures.
▶
Vehicle stationary for a long period of time.
▶
System-related discharge protection measures
Increasing the engine idling speed.
▶
Switching off certain consumers or limiting their
▶
power.
Measures to be taken when vehicle stationary for
more than three weeks
›
Disconnect the
terminal of the vehicle battery.
Checking and charging the vehicle battery
Checking the condition
The battery condition is checked by a specialist ga-
rage during servicing.
Checking the acid level
Applies to a vehicle battery with an acid level indica-
tor.
Black colour - the acid level is OK.
Colourless or pale yellow colour - acid level is too
low, the battery must be replaced.
Requirements for the charging process
✓ Ignition switched off.
✓ Power consumers switched off.
Vehicle battery charging process
To charge the vehicle battery fully, set a charging
current of max. of 0.1 times the battery capacity.
›
Tap on the indicator
before testing, to clear
air bubbles.
Advertisement
Table of Contents
