Matco Tools MBT400 User Manual page 2

The MBT400 Wireless Micro LCD tests all 6V, 8V, 12V lead acid batteries individually or in parallel and 24V HD (series) battery
packs. The tester will display the battery or battery pack condition as % available capacity, rated capacity (i.e. CCA's), state of
charge voltage and good, marginal or replace status. The Wireless Micro LCD also tests 6V,12V, 24V and 36V starter and
charging systems including starter draw, alternator output (loaded/unloaded), and diode ripple. The Wireless Micro LCD features
both a Radio and an IR wireless printer output for remote printout of the test results. Test results can be sent to either an USB
Adapter (included) or stand alone IR Printer. The test data for the last test performed is stored in the memory and can be
reviewed either when connected to a battery, or when disconnected from the battery at a later time.

Patented conductance technology

Displays % of capacity and CCA's.

Tests 6V,8V,12V & 24V (series) lead acid batteries including AGM and Gel

Includes Wireless Battery Module Transmitter

Radio and IR printer interface for remote printing

USB adapter for PC printing (included)

No conversion tables needed

Test batteries from 100 CCA to 3500 CCA (battery pack)

Tests 6/12/24/36V Starting/Charging Systems

Tests both series and parallel batteries

Tests Alternator Ripple

Bad cell is detected and displayed

Displays Multiple International Units

Tests 6V & 8V "golf cart" type batteries

Custom Header with Company Name, Date and Time

Loose lead detection

Temperature Compensation

RoHS compliant brass post adapters included

Multiple language (English, Spanish, French, German, Italian & Dutch)

Reverse polarity protection

Auto shutoff feature

Tests parasitic drain

Made in USA
.
Battery Module will power on
and automatically begin
transmitting data when
connected to battery.
INTRODUCTION
Features:
MBT400 Controls
Radio and IR Interface
Graphic LCD display:
Prompt symbols: + (UP/NEXT)
- (DOWN/BACK)
(ENTER)
Press to scroll UP, DOWN, LEFT, RIGHT or ENTER
Press TEST for testing options
Press VIEW or PRINT
Press SETUP to view setup options
ON/OFF
Battery Module
1
Shows steady on
when connecting to
remote
When blinking data is
sending or receiving
to/from remote
Low Battery