Table of Contents
Advertisement
OPERATION
BASIC ADJUSTMENTS (Continued)
Setting Adjustments (AM/FM Source ONLY)
The AM/FM source adds additional settings to the adjustment menu Press and release POWER
button, then repeat after cycling the sound adjustments for the setting menus: BEEP ON/OFF-
CLOCK 12/24 - P_VOL – CT SYNC or CT INDEP – AREA USA or AREA EUR– DX or LOC –
STEREO or MONO
In each menu item, pressing the VOL + or VOL - buttons allow you to select the sub-
settings. The additional AM/FM settings are:
o CT SYNC or CT INDEP – allows the clock to synch with the radio station's RDS
time feed (SYNC) or to be set independently (INDEP) by the user
o AREA USA or AREA EUR – Selects the region: USA or Europe
o DX or LOC – Selects distance (DX) or local (LOC) for optimized reception
o STEREO or MONO – Selects a stereo or mono broadcast reception
Once the settings are chosen, the menu will automatically cancel after 5 seconds of
inactivity.
Clock Setting Procedure
The clock allows you to select between 12 or 24 hour time formats.
To set the 12 or 24 hour time format, press/release/press POWER
"CLOCK" function in the settings menu appears. Then press the VOL + or VOL - buttons to
choose the format.
To set the clock time, press and hold CLK button and the hours flash. Then press the VOL
+ or VOL - buttons to set the hour. Press and quickly release CLK button until the minutes
flash. Then press the VOL + or VOL - buttons to set the minutes. Once complete, press
CLK button to exit.
Show Clock or Source Information
Press CLK button to show either the clock or source information. Depending on the source, text
information about the song playing may be available on the display (such as RDS-enabled FM
stations, USB music files, iPhone/iPod music or Bluetooth streamed music).
Preset (P_VOL) Setting
This function allows the user to set the volume level at which the unit powers up again depending
on what level was recorded when the unit was last turned off.
To set the P_VOL threshold, advance to the "P_VOL" function in the settings menu and
rotate the VOLUME/SEL knob to choose the volume setting.
When the volume threshold at the time of unit turn off is less than P_VOL value, the next
time turns on the unit the volume will be the same as last time turned off.
When the volume threshold at the time of unit turn off is greater than P_VOL value, the
next time turns on the unit the volume will default to the lower P_VOL preset threshold.
8
button until the
Advertisement
Table of Contents
