Husqvarna QCE7250W User Manual page 17

The signal sounds. SAFE and
on the display. The door is locked.
The symbol
the display also when
Pyrolysis function operates.
To turn off the Child Lock, repeat step 2.
9.2 Using the Function Lock
You can turn on the Function Lock
function only when the oven operates.
When the Function lock is on the
temperature and time settings of a
running oven function cannot be
changed accidentally.
1. Select an oven function and set it
according your preferences.
2. Press and hold
same time for 2 seconds.
The signal sounds. Loc appears on the
display for 5 seconds.
Loc appears on the display
when you turn the knob for
the temperature or press any
button when the Function
lock is on.
When you turn the knob for the oven
functions, the oven stops.
When you turn off the oven while the
Function Lock is on, the Function Lock
switches automatically to the Child Lock.
Refer to "Using the Child Lock".
If the Pyrolysis function
operates, the door is locked
and appears on the
display.
To turn off the Function Lock, repeat
step 2.
9.3 Residual heat indicator
When you turn off the oven, the display
shows the residual heat indicator
the temperature in the oven is more than
40 °C.Turn the knob for the temperature
left or right to check the oven
temperature.
appear
appear on
and at the
if
9.4 Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
(°C)
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic Switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
9.5 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
9.6 Mechanical door lock
The door lock is unlocked when you buy
the oven.
CAUTION!
Do not move the door lock
vertically.
Do not push the door lock
when you close the oven
door.
ENGLISH 17
(h)
12.5
8.5
5.5
3