Husqvarna QCE7250W User Manual page 11

Oven function Application
To grill thin pieces of
food and to toast bread.
Grill
To roast large meat joints
or poultry with bones on
one shelf position. To
Turbo Grilling
make gratins and to
brown.
To turn on the pyrolytic
cleaning of the oven. This
function burns off residu-
Pyrolysis
al dirt in the oven.
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.
6.3 Setting a heating function
1. Turn the knob for the heating
functions to select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven
operates.
3. To turn off the oven, turn the knob
for the heating functions to the off
position.
6.4 Setting the function: True
Fan Cooking PLUS
This function increases humidity during
cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns. After
the function stops, carefully open the
door.
1. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
CAUTION!
Do not refill the cavity
embossment during
cooking or when the
oven is hot.
2. Set the function:
3. Turn the control knob to set
temperature.
4. Preheat the empty oven for 10
minutes to create humidity.
5. Put food in the oven.
Refer to "Hints and tips" chapter.
Do not open the oven door during
cooking.
6. Turn the knob for the heating
functions to the off position to turn
off the oven.
7. Remove water from the cavity
embossment.
WARNING!
Make sure that the oven
is cold before you
remove the remaining
water from the cavity
embossment.
6.5 Fast Heat Up
The fast heat up decreases the heat up
time.
Do not put food in the oven
when the Fast heat up
operates.
1. Turn the knob for the oven functions
to set the fast heat up.
2. Turn the knob for the temperature to
set the temperature.
The signal sounds when the oven is at
the set temperature.
3. Set an oven function.
ENGLISH 11
.