Preparing The Psp ® System For Use - Sony PSP-1010 Instruction Manual

Preparing the PSP
Before using the PSP
these steps to charge the battery.
Before inserting the battery pack, find the serial and model numbers listed
within the battery compartment and make a record of the numbers in the spaces
provided under Owner's Record on page 146.
Getting started 1: Inserting the battery pack
1
Remove the battery cover.
Hold down the push button and slide
the battery cover open.
2
Insert the battery pack.
Align the bottom surface of the
battery pack with the system to
attach.
3
Replace the battery cover.
2 Slide the battery cover in the
direction of the arrow until it
locks firmly into place.
166 Preparing the PSP
system for use
®
system for the first time after purchase, you must follow
®
system for use
®
UMD
UMD
UMD
1 Align the tabs.