Advertisement
10.
If the unit surface is dirty, we recommend to use a dry cotton cloth or with 30% rubbing
alcohol solution to clean.
Problem Solving Guide
PROBLEM
CAUSE
Steamer is not plugged in. Plug into electrical outlet.
The unit fails to steam.
Household Circuit
The light on the On/Off
Breaker/Ground Fault
Switch does not
Interrupter is tripped or
illuminate.
Fuse is blown.
Mineral buildup in the unit.
The unit fails to steam.
The light on the On/Off
Switch does illuminate.
The Water Tank is empty.
Temperature setting is too
Water drips from nozzle
low.
The steamer burned the
Temperature setting is too
clothes
high.
SOLUTION
Reset the Circuit Breaker/Ground Fault
Interrupter, or replace the fuse. If
you need assistance, contact a qualified
electrician.
Follow the cleaning ways Procedure in
this manual.
Refill the Water Fill Tank using the
procedures in this manual.
Follow the temperature setting
procedure in this manual for re-setting
the temperature.
Follow the temperature setting
procedure in this manual for re-setting
the temperature.
Advertisement
