Waring WWB10G Instruction Book page 11

1. SETTING TIME for NIGHT MODE
a. PRESS and hold
b. Use the
c. Once desired time is displayed, press the
wait 10 seconds and the time will be set. Display will show
set time and MOON icon for 3 seconds.
2. ENTERING/EXITING NIGHT MODE
a. Pressing
energy saving mode. Display will show the time of day and
the MOON icon.
b. Unit will exit night mode and re-energize automatically
at the set time.
c. To exit out of NIGHT MODE manually, press the
button or hold
a. I f
Press Start to re-energize the unit
b. If
will automatically re-energize and start heating to set
temperature
Helpful Hints
Why use Night Mode?
When you need hot water at the start of business but do not want
your machine on full power during non-business hours. Utilize night
mode, an energy saving feature that will maintain a water temperature
of 158°F/70°C during non-business, and heat to full set temperature
at the time you set.
What time should I set Night Mode to?
Once night mode turns off and the machine is re-energized, it will
take approximately 1 hour to reach 205° (MAX), so set the time for
night mode for approximately 1 hour before you will need hot water.
Can I change the temperature in Night Mode?
158°F/70°C is the fixed temperature and cannot be adjusted.
button for 2 seconds:
arrows to scroll to the desired time.
button once will enter into night mode/
button for 2 seconds.
button is pressed to exit night mode, you must
button is pressed to exit night mode, unit
11
button or