Noland Engineering RS11 v3.0 Manual page 13

To remove any of the above assignments, send the command
@D# - or @d# -
where '#' is the number of the Analog Input (1-4) to be removed from the message.
Use of most of the above commands is not recommended. The RS11 includes a PC Setup Utility which makes configuration
much easier than using these commands.
Table B4 Transmission Parameters Message data field assignments
Command
@M#P1 or @m#p1
@M#S1 or @m#s1
@M#P2 or @m#p2
@M#S2 or @m#s2
To remove any of the Table B4 assignments, send the command
@M# - or @m# -
where '#' is the Analog Input (1-4) to be removed from the message.
Table B5 Fuel Level Message data field assignments
Command
@L#P or @l#p
@L#S or @l#s
To remove any of the Table B5 assignments, send the command
@L# - or @l# -
where '#' is the Analog Input (1-4) to be removed from the message.
Use of most of the above commands is not recommended. The RS11 includes a PC Setup
Utility which makes configuration much easier (see Appendix D).
Input Input assigned to field ..
A# Port Trans Pressure (Instance 0)
Stbd Trans Pressure (Instance 1)
A# Port Trans Temperature (Instance 0)
Stbd Trans Temperature (Instance 1)
Input
A#
A#
Input assigned to field ..
Port Fuel Level (Instance 0)
Stbd Fuel Level (Instance 1)