Sony SLV-X827MN Operating Instructions Manual page 7

Manufacturer Code number
Saba 12,13
Samsung 22,23
Sanyo 25
Schneider 46
Seleco 14
Sharp 29
Siemens 39
You can use the WIDE button after entering a code number with any of the
following marks;
1
* : Press WIDE to switch the wide picture mode on or off.
2
* : Press WIDE, then press VOL+/– to select the wide picture mode you
want.
3
* : Press WIDE. The menu appears on the TV screen. Then, press CURSOR
>/./?// to select the wide picture you want and press EXECUTE.
Notes
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote commander, the code number
automatically resets to 01 (Sony). Reset the appropriate code number.
Manufacturer Code number
Sinudyne 37
TEAC 67
Telefunken 36
2
Thomson 43*
Toshiba 38
White
Westinghouse 34
Getting Started
SLV-X827MN 3-858-297-11 (1)
7