Loading A Mobility Device - Bruno Curb-Sider VSL-6000 Operator's Manual

5.0 LOADING A MOBILITY DEVICE

STEP 5.1
NOTE: Before loading a mobility device onto the
Curb-Sider, be sure required docking device
has been mounted to the mobility device.
• Park the scooter alongside the vehicle:
- as close to the rear of the vehicle as possible;
- with the scooter facing in the direction oppo-
site that of the vehicle;
- so that the scooter's front wheel is even with
the vehicle's rear bumper.
• Open the vehicle's rear door.
• Check for sufficient space behind your vehicle.
Four (4) feet (1.2 m) of clear space behind
the vehicle is usually adequate.
• Move any obstacles that could interfere with
the movement of the scooter as the lift swings
it into the vehicle. Open driver-side door.
• Move mobility device into transfer position.
• Turn scooter off (lock the wheelchair wheels).
©BRUNO
!
WARNING
TIP OVER RISK
VSL-6000/6900UK Operator's 04/16/2019
Allowing mobility
device wheels to roll off
a raised surface during
loading can result in
operator injury and/or
damage to the mobility
device or vehicle.
Keep mobility device
at a safe distance from
raised surfaces (eg.
sidewalk).
9