Table of Contents
Advertisement
OPERATION
switched to that EON linked station,
but no information could not be
received because the EON linked
station is located too far from that
area. So the radio is switched back
to current station again.
In above operation, a customer listen
to a wrong program or mute sound
for a while.
EON TA LOCAL mode
When the filed strength level of EON
linked is less than threshold level,
the radio does not switch that
station, and a customer can hardly
listen to any disturbances.
When EON TA LOCAL mode is
selected, "EON TA LO" on numeric
display is indicated for a few
seconds.
EON TA DISTANCE mode
EON TA switching is try to
implemented by the information of
current station.
When EON TA DISTANCE mode is
selected, "EON TA DX" on numeric
display is indicated for a few
seconds.
The RDS data used are the PI, PS,
AF, TP, TA, EON and PTY data.
PI:
Program Identification Code
Code for identifying programs
PS:
Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF:
Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TP:
Traffic Program Identification
Identification data for traffic
information broadcasting
station
TA:
Traffic Announcement
Identification
Identification data showing
traffic information is being
transmitted or not
EON: Enhanced Other Networks
Information
Broadcasting information on
PI, AF, TP, TA, etc. relating to
networks other than the
network used for current
reception
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
CD OPERATION
• CD OPEN/CLOSE/EJECT
When the front panel is in State 2 and
the unit is on, press (eject) button (4),
the panel will change into State 3 and
display the disc slot (5). Then insert a
disc into the slot, the panel will
automatically turn up. Press
button (4) again to eject the disc.
And after about 10 seconds, the panel
will turn up.
• SELECT TRACKS
During CD operation, press
MANU/SKIP
MANU/SKIP
the previous track or the following
track. Track number shows on display.
During CD operation, hold
MANU/SKIP
MANU/SKIP
reverse or fast forward. CD play starts
from when you release the button.
• PAUSE PLAYING
Press PAU button (19) to pause CD
player. Press it again to resume play.
• REPEAT THE SAME TRACK
During CD operation, press RPT
button (21) to continuously repeat the
same track. Press it again to stop
repeat.
12
(eject)
button (16) or
button (17) to move to
button (16) or
button (17) to fast
Advertisement
Table of Contents
