If The Picture Is Not Clear - Sony SLV-X717ME Operating Instructions Manual

Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions.
The disabled positions will be skipped later when you press the PROG +/–
buttons.
1
Press MENU, then select TUNER PRESET and press EXECUTE.
2
Select CHANNEL SET.
3
Press PROG +/– until the programme position you want to disable
appears beside "PROG" on the TV screen.
4
Press programme number button "0" twice to display the number "0"
beside CHANNEL SET.
5
Repeat steps 3 and 4 for other positions you want to disable.
6
Press EXECUTE.

If the picture is not clear

Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– to select the programme position for which you cannot
obtain a clear picture.
2
Press MENU, then select TUNER PRESET and press EXECUTE.
3
Select FINE TUNING. The fine tuning meter appears.
TUNER PRESET PROG14
NORMAL / CATV • NORM CATV
AUTO PRESET
CHANNEL SET 35
AFT • ON OFF
FINE TUNING
SET : [ ]
4
Press CURSOR ?// to get a clearer picture, then press EXECUTE.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
Selected programme
position
SLV-X817/717ME/PS/SG
17
Getting Started
3-858-651-11 (1)