Sony SLV-SP100R Operating Instructions Manual page 9

To obtain a clear playback picture
If the playback picture does not
appear clearly in step 3 on page 8,
turn the RF CHANNEL screw on
the rear panel of the VCR with a
screwdriver to a position where the
TV clearly displays the playback
picture.
To select the TV system
For your TV to receive the correct
signal from your VCR you must set
the TV SYSTEM switch on the rear
panel of the VCR to either G (for
system B/G) or K (for system D/K).
If this switch is set to the wrong
position, the sound will be
distorted.
RF CHANNEL
TV SYSTEM
G
K
9
Getting Started