Specifications; Overview; Obd Ii On-Board Diagnostics; Vehicle Coverage - CEN-TECH 64981 Owner's Manual & Safety Instructions

Obd ii & can code reader
Table of Contents

Advertisement

Specifications

Display Screen
Operating Temperature
Storage Temperature
Power

Overview

OBD II On-Board Diagnostics

It is required by the EPA that all 1996 and
newer vehicles sold in the United States be
equipped with an OBD II computer system�
OBD II is an early warning system
designed to monitor engine, transmission,
and emissions control components by
performing specific diagnostic tests�
When a fault condition is detected, the
system captures important data and
activates the "Check Engine" light�

Vehicle Coverage

This Code Reader is designed to work with
all OBD II compliant vehicles, including
those equipped with a CAN bus�
OBD II was installed in some 1994 and
1995 model year gasoline vehicles�
Item 64981
Backlit LCD
32°F to 122°F
-4°F to 158°F
9 to 16 VDC provided by vehicle battery
For technical questions, please call 1-888-866-5797.
If the light comes on, the vehicle might have
a condition that wastes fuel, shortens engine
life, or causes excessive air pollution� If
the problem that caused the light to come
on is addressed, for instance a loose gas
cap is tightened, the light will go out�
If the light comes on and stays on, a minor
engine fault condition is occurring and
should be addressed as soon as possible
If the light is blinking, a severe engine
fault condition is occurring and should
be addressed immediately�
The Code Reader connects to the vehicle's
computer system and captures information
that can help identify the fault condition�
To verify if a 1994 or 1995 vehicle is
OBD II compliant, check the Vehicle
Emissions Control Information label, which
is located in the engine compartment�
Page 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents