Equinox Systems Blitzer II User Manual page 6

DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address mode, press the "MENU" button on the front of the unit to show
on the LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to set the
required DMX address. Press the "ENTER" button to confirm the setting. To exit out of any of the above
options, press the "MENU" button.
DMX channel mode:
To access the DMX channel mode, press the "MENU" button on the front of the unit to show
LED display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose one of the
1/2/3-1 or 3-2 DMX channel modes. Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
PLEASE NOTE: When the unit is receiving DMX the first red dot on the display will flash.
1 channel mode:
Channel Value Function
000-010 No function
CH1
011-255 Strobe (slow-fast)
2 channel mode:
Channel Value Function
CH1 000-255 Master dimmer (0-100%)
000-005 No function
006-010 Blackout
CH2
011-250 Strobe (slow-fast)
251-255 No function
www.prolight.co.uk
Operating instructions
3 channel mode 1:
Channel Value Function
CH1 000-255 Master dimmer (0-100%)
000-005 No function
006-010 Blackout
CH2
011-250 Strobe (slow-fast)
251-255 No function
CH3 000-255 Flash duration (slow-fast)
3 channel mode 2:
Channel Value Function
CH1 000-255 Master dimmer (0-100%)
000-005 No function
006-010 Blackout
011-033 Strobe pulse (slow-fast)
034-056 Strobe ramp up (slow-fast)
CH2 057-079 Strobe ramp down (slow-fast)
080-102 Strobe random (slow-fast)
103-127 Strobe (short flash)
128-250 Strobe (slow-fast)
251-255 No function
000-005 Sound active OFF
CH3
006-255 Sound active ON (sens low-high)
Blitzer II Strobe User Manual
A001
Ch
on the
6